About the product
A kit to upgrade your bike to electric power. With a motor on the rear wheel, you'll feel like you've got the wind at your back. Because the motor is in the rear hub it is also invisible and makes the bike look sleeker. It's also easier to steer because the weight of the whole bike is less with the rear motor. The motor is suitable for urban cycling as well as for riding on less steep trails.
Motor features:
Name: Shengyi
Voltage: 36V
Power: 250W
Size of wheels supported: 12" od 28"
Max torque: 40 Nm
Speed: 25km/h
weight; 2,8 kg
IP protection;65
Output: ≥80
Operating temperature range:: od -20 do 45°C
Dimensions: Width: 135 mm višina: 120 mm
Suitable for frame: 135 mm širine
Battery ECONO Tube M 36V 17,5Ah/630Wh
The battery is compatible with 36V motors. The battery has a charger connector and a battery charge indicator. The 17,5 Ah battery capacity gives you enough power for short trips around town as well as for trips in the countryside. The battery is only compatible with the original ECONO 2A or 4A charger with 3pin connector, which ensures greater safety and temperature monitoring during charging.
Battery properties:
Capacity: 630Wh (17,5 Ah)
Voltage:36V
Max. voltage: 42V
Min. voltaqge: 28V
Max. charging current: 4A
Controler
The controller is designed for front or rear motor. The controller drives the motor according to the display and pedalling speed settings. A speed sensor, a battery and a display are also connected to the controller. The controller shall be mounted in a controller housing.
Controller properties:
Voltage: 36V
Length x Width x Height:: 80mm x 54mm x 29mm
Power: 250W
Maximum current: 12A
Operating temperature: od -20°C do 45°C
Compatible motor: brushless DC motor
IP protection: 65
The display is compatible with both front and rear Econo engines. It is small and simple. The display fits next to the hand grip.
LCD MPCU display features
5 levels of assistance,
Kilometres travelled
Battery charge indicator,
Switching lights on and off
Walk assist (6km/h)
Charger
The ECONO charger charges with a current of 2A. It is designed for 36V ECONO batteries that use a 3pin connector. This allows the charger to monitor the temperature of the battery, which increases safety during charging. The charger charges the battery using the CC-CV method. The maximum charging voltage is 42V.
2X Cables for front and rear lights
Controller housing
It protects the handlebar from external influences and securely fixes the handlebar to the frame of your bike
Package included
1x Motor
1x Battery 630 Wh
1x Charger Econo 3 pin 2A
1x Controler
1x Display LCD
1x Sensor
1x Cable
2x Cable for lightsj
1x Controler housing
