About the product
The set for electrical processing of your bike includes components with which your ordinary bike becomes electric. A rotation sensor shall be installed on the crankcase. Then, with the aid of information from the plant sensor and the level of assistance set on the LED screen, the controller controls the motor. You also need an ECONO battery where you can choose any capacity. The set is compatible with most ordinary wheels.
The sensor is compatible with square-taper spindles.
You also need:
Rear hub motor
ECONO battery
Display specifications LED 790
| Motor assist levels | 4 | |
| Battery capacity indicator | Yes | |
| On/off the lights | Yes | |
| Walk Assist | 6 km/h | |
| IP protection | 65 | |
| Battery voltage | 36V, 48V | |
| Temperature range | -20 to 45 ° C | |
| The dimension of the controller | 42 x 82 x 56mm (H, W, L) |
Controller specifications
| Nominal power | 250W | |
| voltage | 36v | |
| Max discharge | 15a | |
| Max. torque | 40m | |
| IP protection | 65 | |
| Speed -limit | 25km/h | |
| Weight | 360g | |
| The dimension of the controller | 360 x 65 x 20mm | |
| Screen | LED 790 |
The scope of the package
1x controller 36V with cable; built into the Battery Battery M/L
1x Cadence sensor
1x screen LED 790